HTYD-600 Kinematic Viscosity Tester is applicable to standards such as GB265 “Determination of Kinematic Viscosity of Petroleum Products”. At a constant temperature, it measures the time it takes for a certain volume of liquid to flow through a calibrated glass capillary viscometer under gravity. The product of the capillary constant of the viscometer and the flow time is the kinematic viscosity of the measured liquid at that temperature.

This instrument uses a digital temperature controller to control the temperature, with digital temperature display, high temperature control accuracy, digital stopwatch timing, and uniform temperature in the thermostatic bath. It can hold four viscometers for experiments at the same time and can also be used as a high-viscosity thermostatic water bath for other experiments.

Main Features:

1. Adopts a digital temperature controller to control the temperature in the bath, which is fast and stable with an accuracy of 0.1 degree.

2. 0.1-second to 999.9-second high-brightness nixie tube stopwatch timing, accurate and easy to use.

3. Double-layer thermostatic glass bath, with uniform temperature distribution in the bath and good temperature control effect.

4. Components such as heaters are made of stainless steel, which is corrosion-resistant and durable. The circular fluorescent lamp provides illumination for easy observation.

5. Four viscometer test holes, and the capillary meter holder adopts a three-point vertical type, which is flexible and convenient to operate and reliable to clamp.

Main Technical Indicators:

Display mode: Precision digital temperature controller, high-brightness digital stopwatch timer

Temperature control range: Room temperature to 180℃, arbitrarily set; (other media are required when the temperature is higher than 80 degrees)

Temperature control accuracy: ±0.1℃

Timing accuracy: ±0.1S

Timing range: 0.1 seconds – 999.9 seconds

Sample loading quantity: 4

Temperature measuring element: Precision platinum resistor

Stirring speed: 1520 revolutions per minute

Power supply requirement: AC220V±10% 50Hz

Maximum size: 440*310*500 (length*width*height)

Instrument weight: Approximately 12Kg