Contact form一、Product Introduction
Complies with the requirements of standards including GB/T50081-2008 (Long-term Performance and Durability Test Method for Ordinary Concrete), JG/T249-2009, T0528-94, and GBJ81-85.
二、Technical Parameters
| maximum pressure of test | 1.2Mpa |
| test pressure resolution | 0.01MPa |
| Relative error of the test pressure reading | ±0.015MPa |
| test pressure holding error | ±0.05MPa |
| Number of test samples per test | 36个 |
| Maximum pressure for specimen sealing | 3.0MPa |
| sealing pressure resolution | 0.01MPa; |
| Sealing method for the specimen | Water seal, safe and stable |
| Test pressure pressurization method | Top-down pressure |
| The overall structural form of the machine | Shelf-type structure with automatic elevation for each group, supporting specimen placement up to 1600mm |
| Lifting method for each floor | Electric lift, safe and fast |
| mold cavity size | Top opening: 180mm, bottom opening: 190mm, height: 155mm |
| Height of the specimen’s sealing sleeve | 142mm |
| Material of the specimen bucket | 5mm High Strength Sheet Formed by One Time Stamping |
| Material of the specimen’s sealing sleeve | Special imported materials with high wear resistance and high pressure resistance |
| Water seepage detection methods | The top surface sensor of the specimen detects the situation promptly and accurately. |
| Test report | Automatically generate test reports and customize report templates based on customer requirements (costs incurred by the customer) |
| Power supply | 380V-50HZ |
| Total power | 2000W |
| Overall dimensions | 2500x950x2400m |
| weight | About 2000Kg |
